About the Green Springs Project:
Green Springs is located near the southern end of the Cortez Trend of Carlin-type gold deposits in White Pine County, Nevada, adjacent to Fiore Gold’s Pan Mine and Gold Rock Project and Waterton’s Mount Hamilton deposit. The Green Springs property is 18.5 km2 encompassing 3 shallow past producing open pits and numerous targets that were not mined. Contact Gold’s 2020 drill program stared at the Echo Zone and has progressed through the Zulu, Charlie, Alpha, Bravo, Delta and Golf Zones.
Contact Gold signed a purchase option agreement with Ely Gold Royalties (“Ely Gold”) to acquire an undivided 100% interest in Green Springs in July 2019. Green Springs is an early-stage exploration property and does not contain any mineral resource estimates as defined by National Instrument 43-101, Standards of Disclosure for Mineral Projects (“NI 43-101”). There has been insufficient exploration to define a mineral resource estimate at Green Springs. Additional information about Green Springs is summarized in the NI 43-101 Technical Report entitled “NI 43-101 Technical Report for the Green Springs Project, White Pine County, Nevada, USA” prepared for Contact Gold, with an effective date of June 12, 2020, and dated August 5, 2020, as prepared by John J. Read, C.P.G; an independent consultant and qualified person under NI 43-101, and can be viewed under Contact Gold’s issuer profile on SEDAR at www.sedar.com.
The scientific and technical information contained in this news release has been reviewed and approved by Vance Spalding, CPG, VP Exploration, Contact Gold, who is a “qualified person” within the meaning of NI 43-101. Drill intercepts were calculated using a minimum thickness of 3.05 metres averaging 0.14 ppm gold and allowing inclusion of up to 4.57 metres of material averaging less than 0.14 ppm gold for low grade intervals and higher-grade intervals were calculated using a minimum thickness of 3.05 metres averaging 1.00 ppm gold and allowing inclusion of up to 4.57 metres of assays averaging less than 1.00 ppm gold. Gravimetric assays are used for all Fire Assays above 4.00 ppm gold. Cyanide solubility assays are completed on all Fire Assays greater than 0.1 g/t. True width of drilled mineralization is unknown, but owing to the apparent flat lying nature of mineralization, is estimated to generally be at least 70% of drilled thickness.
The composited grades for comparison to the Bottle Roll assays are weighted averages of the amount of pulp used from individual 5-foot assays. Quality Assurance / Quality Control consists of regular insertion of certified reference standards, blanks, and duplicates. All failures are followed up and resolved whenever possible with additional investigation whenever such an event occurs. All assays are completed at Paragon; an ISO 17025:2005 accredited lab. Check assays are completed at a second, reputable assay lab after the program is complete.
Full Press Release Link: http://www.contactgold.com/_resources/news/nr-20210126.pdf
Paragon Geochemical has a State of the Art Assay Lab based in Sparks, Nevada. Please review a press release featuring the quality work our lab has completed.